Introduction
Advertising
Equipment is safe for connection and disconnetion to live conductors AC Alternating Current DC Direct Current Either AC or DC Not Applicable to.
The G2 Phoenix Series is a hand-held, battery powered digital multimeter
with clamp-on current measuring capability, back light and work area light.
Features include
• 3-3/4 digit, count 4000 count LCD display https://teensnew818.weebly.com/openoffice-401-mac-download.html.
• Auto-ranging measurement with manual ranging capability
• MIN/MAX (Peak Hold) (all ranges except Frequency) • Frequency/Duty Cycle/Data Hold • Auto power off • Dual display • Built-in test lead storage • EasyVue Backlit display & Worklight (DL379 & DL389) • Detachable current probe with optional current hook adapter for tight spaces (DL379 & DL389) • Temperature (DL379 & DL389) • Magnetic mount (DL379 & DL389) • TRMS Measurement (DL389 only)
Safety Notes
Before using this meter, read all safety information carefully. In this
manual the word 'WARNING' is used to indicate conditions or actions that may pose physical hazards to the user. The word 'CAUTION' is used to indicate conditions or actions that may damage this instrument.
• Do not attempt to measure any voltage that exceeds the
category based rating of this meter • Do not attempt to use this meter if either the meter or the test leads have been damaged - Turn instrument in for repair at a qualified repair facility • Ensure meter leads are fully seated by making a quick continuity check of the leads prior to making voltage measurements • Keep your fingers away from the test lead’s metal probe contacts when making measurements - Always grip the leads behind the finger guards molded into the probes • Do not open the meter to replace batteries while the probes are connected
WARNING!
Exceeding the specified limits of this meter is dangerous and can
expose the user to serious or possibly fatal injury.
• Voltages above 60 volts DC or 25 volts AC may constitute a
serious shock hazard • Always turn off power to a circuit (or assembly) under test before cutting, unsoldering, or breaking the current path - Even small amounts of current can be dangerous • Always disconnect the live test lead before disconnecting the common test lead from a circuit • In the event of electrical shock, ALWAYS bring the victim to the emergency room for evaluation, regardless of the victim’s apparent recovery - Electrical shock can cause an unstable heart rhythm that may need medical attention • If any of the following indications occur during testing, turn off the power source to the circuit under test: Ipod touch model mc540ll user manual.
• Arcing
• Flame
• Smoke
• Extreme heat
• Smell of burning materials
• Discoloration or melting of components
WARNING! Harry potter and the goblet of fire audiobook free download.
Higher voltages and currents require greater awareness of physical
safety hazards. Before connecting the test leads; turn off the power to the circuit under test; set the meter to the desired function and range; connect the test leads to the meter first, then connect to the circuit under test. Reapply power. If an erroneous reading is observed, disconnect power immediately and recheck all settings and connections.
This meter is designed for trade professionals who are familiar
with the hazards of their trade. Observe all recommended safety procedures that include proper lock-out utilization and the user of personal protective equipment that including safety glasses, gloves and flame resistant clothing.
1. Clamp: Measure inductive AC current. Opens to 1.25' (32 mm).
2. Wire Separation Tab/NCV sensor : Used to isolate an
individual wire from a bundle for testing.NCV sensor helps detect live voltage.
Nougat manual download iso. 3. Conductor Alignment Marks: Used to aid in the visual
alignment of a conductor when measuring inductive amperage. https://treeaqua539.weebly.com/blog/zte-axon-7-mini-user-manual. Greatest accuracy is achieved when the conductor inside the clamp is centered at the intersection of these marks.
4. Test Lead Holder: Used for hands-free use of one of the test
probes.
5. Hand Guard: Used as a point of reference for the operators
safety.
WARNING!
Always keep your hands and fingers behind the hand guards
when measuring current on exposed conductors. Contact may
result in serious injury. Team fortress the game.
6. Clamp Lever: Opens and closes current clamp jaw.
NOTE: The clamp uses a high tension spring to close the jaw. Do not allow fingers or objects to become pinched in the base as jaw closes
7. NCV Button: Activates non-contact voltage function
8. Range Button: Used to select range for upper and lower display.
9. HOLD/Backlight Button: Freezes display or activates display
backlight and work area light. (Backlit and work area light only available on DL379/DL389)
10. Tex live utility download mac os x. MIN/MAX Button: Activates MIN/MAX capture function,
cycles through minimum value, maximum value. Press longer than two seconds to return to current reading.
11. Rotary Function Switch:Turns meter on and is used to select
the range or function
12. Upper Display : Used to display current when used with UEi
clamp or hook adapter. Displays output from other accessories when connected to the UEi meter.
13. Lower Display: Used to display input to test lead jacks.
Includes AC/DC Volts, Frequency, Resistance, Diode, Capacitance and AC/DC microamps (µA).
14. Select Button: Used to choose measurement mode from
selections with multiple options such as AC or DC volts, AC or DC µA, Resistance, Diode, Capacitance or Continuity, Temperature in ˚F or ˚C.
15. Temperature Input Jack: Input jack for k-type
thermocouple probe (DL379/DL389 only).
16. Temperature Switch: Move the Switch down to measure
temperature. NOTE: Test leads must be removed from input jacks prior to operating the temperature function.
17. Hz/Duty Button: Used to scroll through Frequency or Duty
Cycle when in the AC Voltage measurement mode.
18. Common Terminal: The black test lead is plugged into this
terminal to supply the ground or “low” reference for all measurements. G2 Phoenix Pro Dl379 Manual
19. Category Max Indicator: Indicates maximum voltage for the
rated working category.
WARNING!
Do Not exceed 1000 volts DC or AC - RMS at either the
common or multifunction imput ports as measured from
earth ground.
20. Multifunction Input Jack: Used for measuringAC/DC Volts,
Frequency or Duty Cycle, Resistance,Diode, Continuity and Capacitance.
DL369/DL379/DL389 Download easeus data recovery mac recover deleted trash.
Advertising
This manual is related to the following products:
HVACKIT, DL389KIT, DL389COMBO, DL389, DL379KIT, DL379COMBO, DL379, DL369, CH3
Popular Brands
G2 Phoenix Pro Dl379 User Manual Pdf
Popular manuals
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |